One of my best performing units was the Killa Kan, which finished off the Thunder Wolves, and so, as you are allowed units of up to 3 of them, I set about looking for suitable STLs to add a couple more to the force.
However, it quickly became apparent that I had a bit of a scale issue. Pete had mentioned that he though my current model was a little big for a Killa Kan; once I'd found some files I wanted to print, it turned out he was right.
I don't think I've ever seen one of the official models in the flesh and so when I had previously printed a model labelled as a Killa Kan, I naturally assumed that's what it was.
This now raised the issue of whether I could conceivably use my existing model as a Deff Dread, the larger Ork Dreadnought, as it only has two obvious weapons (Deff Dreads have four) - a claw and a drill.
However, underneath the drill are two non-specific holes (possibly meant to be kampsnor targetters) that could conceivablly mount a Skorcha each. Given that Ork shooting isn't great, this might be an effective choice.
Until I get round to adding another weapon mount to the model, I figured that would work well enought, and so I could get on with printing my new unit.
The designs I settled on were these quite nicely detailed open topped walkers, which each took about 5 hours to print as the separate arms were on the same plate.
In theory I could have got a better quality print by taking more time with a smaller nozzle, but I think the rough-and-ready look quite suits the Orks.
Also, I was impatient.
There were only two sculpts available; one with a big shoota and claw, the other with a rokkit launcher and saw, and so after printing and assembling the first model, I swapped the ranged weapons on the other two to give a bit of visual variety.
I would probably have been better off printing two rokkit launchers rather than big shootas as my army lacks anti-tank weapons, but I didn't think that far ahead at the time.
I did have a couple of breakages on the final model I printed. However as this was the duplicate sculpt I took this as an opportunity to improvise in order to cover up the issue and change the silhouette a little.
I added some suitable Grot stowage, and included a Space Marine helmet in the colours of Pete's homebrew chapter, the Emperor's Mailed Fists.
It remains to be seen whether this model will ever kill one of them.
In terms of painting, as always with the Orks, I kept things simple, starting with a silver undercoat and a liberal application of Agrax Earthshade.
Yellow parts were painted before being sponge-weathered and the glyphs, banners and stowage were picked out.
The Grot pilots were done without the aid of washes or contrast, as these don't really work FDM prints as they simply emphasise the layer lines, so slightly thicker paint is the order of the day.
I'm really pleased with the outcome of this little diversion, which has not only added more Killa Kans to my army as intended, but has also indirectly added a Deff Dread as well.
Some much needed reinforcements as I'm playing against Matt's Tyranids late...however, I think he's taking the can-opener biomorph.
Acquired: 86
Painted: 235
Lead Mountain: 604
No comments:
Post a Comment